Evaluación de constructividad en Proyectos BIM en Brasil


Resumen

Esta investigación se derivó de una parte de la base teórica de la tesis de maestría del autor, desarrollada en conjunto con el Programa de Maestría en Diseño, Gestión y Gestión de Proyectos, en la Universidad Internacional Iberoamericana, UNINI-México (UNINI-MX). El autor tiene experiencia en proyectos en el sector de la construcción, su compatibilidad y enseñanza del software específico utilizado en este segmento, y se motivó al observar el contexto en la práctica y la vergüenza personal. En otros países, es una realidad, y no una novedad, aprobar los puntajes de los proyectos de construcción, en relación con sus criterios de construcción, antes de proceder a su logro. También es digno de mención que los proyectos que resultan del modelado de la información de construcción (proyectos BIM), entre otros avances tecnometodológicos entrantes de manera exponencialmente creciente en la velocidad de ocurrencia, calidad y cantidad de colaboraciones, exigen cada vez más cambios en los paradigmas en la construcción civil, pero facilitan la extracción de datos que pueden evaluarse, en relación con su capacidad de construcción, de forma automatizada. El propósito de BIM no debe ser solo la automatización de los resultados gráficos-textuales. Este trabajo buscó conceptualizar, con base en la literatura y las experiencias, cómo y cuándo extraer información de proyectos BIM que buscan automatizar la Evaluación de la Constructibilidad del Edificio.


##plugins.themes.bootstrap3.article.details##

Cómo citar

Kotaira, K. (2020). Evaluación de constructividad en Proyectos BIM en Brasil. Project Design and Management, 2(2). Recuperado a partir de https://www.mlsjournals.com/Project-Design-Management/article/view/446



Biografía del autor/a

Keila Kotaira

Architect and BIM Coordinator. Autodesk Technical Representative (ATR - AEC), Autodesk Certified Instructor (ACI - Silver), Autodesk Certified Professional (ACP).


Citas

Amancio, R. C. (2010). Identificação de fatores de construtibilidade que influenciam as fases do processo de projeto em pequenos escritórios de arquitetura. Dissertação de Mestrado em Construção Civil. Universidade Federal do Paraná. Curitiba.

Atkins, W. S. et al. (1994). Strategies for the European construction sector. A Programme for change. Construction Europe KHL Publishing Ltd. and Office for Official Publications of the European Communities, East Sussex.

Autodesk Knowledge Network (2019). Sobre os relacionamentos da modelagem paramétrica. Retrieved from https://knowledge.autodesk.com/pt-br/support/revit-products/getting-started/caas/CloudHelp/cloudhelp/2018/PTB/Revit-GetStarted/files/GUID-71F2C8EE-2A90-4076-A6C7-702082566DDF-htm.html/.

Barbosa, P., Andery, P. (2015). Contribuição ao estudo de medidas para melhoria da construtibilidade no processo de projeto em empresas construtoras. Construindo, 7(1).

Bryde, D., Broquetas, M., & Volm, J. M. (2013). The project benefits of building information modelling (BIM). International journal of project management, 31(7), 971-980.

Building and Construction Authority, BCA (2005). Code of Practice on Buildable Design. Singapura

Building and Construction Authority, BCA (2015). Code of Practice on Buildable Design. Singapura.

Building and Construction Authority, BCA (2017). Code of Practice on Buildable Design. Singapura.

Building and Construction Authority, BCA (2017). Guide to the Buildable Design Appraisal System. Singapura.
CIRIA (1983). Buildability: An Assessment CIRIA. Publications, Special publication, 26.

Construction Industry Institute (2012). CII Best Practices Guide: Improving Project Performance. Estados Unidos.

Delegrego, V. (2017). Construtibilidade: lições internacionais e aplicações para o Brasil. Trabalho de conclusão de curso de Engenharia Civil. Universidade Federal de Santa Catarina. Florianópolis.

Designing Buildings Wiki, DBW (2016). BIM Glossary of Terms. Retrieved from http://www.designingbuildings.co.uk/wiki/BIM_glossary_of_terms/.

Eastman, C., Teicholz, P., Sacks, R., & Liston, K. (2011). BIM handbook: A guide to building information modeling for owners, managers, designers, engineers and contractors. John Wiley & Sons.

Francis, V. E. et al. (1999). Constructability strategy for improved project performance. Architectural Science Review, 42, (2), 133-138.

Heineck, L. F. M., Santos, D. G., & Saffaro, F. A. (2004). Uma proposta para a Classificação de decisões voltadas a melhoria da construtibilidade.

Heineck, L. F. M. & Rodriguez, M. A. A. (2003). A construtibilidade no processo de projeto de edificações.

Jiang, Li. (2016). A constructability review ontology to support automated rule checking leveraging building information models. The Pennsylvania State University, 2016. PhD Thesis. The Pennsylvania State University. Department of Architectural Engineering.

Lam, P. T.; Wong, F. W.; & Tiong, R. (2006). An Empirical Study of the Relationship Between Buildability and Productivity in Singapore–Lessons for Hong Kong SAR. In: CRIOCM 2006 International Research Symposium, The Chinese Research Institute of Construction Management and North China Electric Power University. p. 3-5.

Lawson, B. (2006). How designers think: the design process demystified. Routledge.

McPartland, R. (2017a). BIM dimensions - 3D, 4D, 5D, 6D BIM explained. The NBS. Retrieved from https://www.thenbs.com/knowledge/bim-dimensions-3d-4d-5d-6d-bim-explained/.

McPartland, R. (2017b). What is IFC? The NBS. Retrieved from https://www.thenbs.com/knowledge/what-is-ifc/.

Melhado, S. B. (1994). Qualidade do projeto na construção de edifícios: aplicação ao caso das empresas de incorporação e construção. Tese de Doutorado. Escola Politécnica da Universidade de São Paulo. São Paulo.

Moore, D. R. (1996b). Buildability assessment and the development of an automated design aid for managing the transfer of construction process knowledge. Engineering, Construction and Architectural Management, 3(1/2) 29-46.

Moore, D. R.(1996a). Task difficulty assessment: a contribution towards improved buildability through simplification. Tese de Doutorado. Montfort University. Wetherby.

National BIM Standard-United States, NBIMS-US (2016). About the national BIM standard United States. NBIMS-US. Retrieved from https://www.nationalbimstandard.org/about/

Reis, P. R. (2006). Arte de vanguarda no Brasil: os anos 60. Zahar.

Rodrigues, L. T. & Goncalves, A. A. (2015). A Construtibilidade nas Fases de Engenharia e Suprimento para a Construção e Montagem Industrial.

Van Nederveen, G. A.; & Tolman, F. P (1992). Modelling multiple views on buildings. Automation in Construction, 1(3), 215-224.

Wong, F. W. H. et al. (2006). A review of buildability performance in Hong Kong and strategies for improvement. Surveying and Built Environment, 17( 2), 37-48.

Wong, W-H. (2007). Developing and implementing an empirical system for scoring buildability of designs in the Hong Kong construction industry. Tese de Doutorado. The Hong Kong Polytechnic University.

Zhang (2016), Cheng et al. Quantitative Assessment of Building Constructability Using BIM and 4D Simulation. Open Journal of Civil Engineering, 6(3), 442.